Equipementier HVAC Automotive
Find all the sectors in which we operate.
The SKIMO SPLIT Plus is delivered pre-charged with refrigerant.
The exterior and evaporator units are separate, making it easy to install in different configurations depending on the available space. The compressor-condenser unit can be installed on a wall in a horizontal position or flat on a hood. The evaporator is located in the cabin.
The SKIMO SPLIT Plus is particularly suitable for cabins on the following vehicles:
Because of their compact size, the evaporator (in the cabin) and the compressor-condenser unit (outside) can be easily installed in different configurations depending on the available space.
The compressor-condenser system can be installed horizontally on a wall or in a flat position on a hood.
Before being placed on the market, the SKIMO SPLIT Plus system was subject to numerous performance tests in the toughest operating conditions in our specialist test centre.
The SNDC test centre reproduces outdoor temperature and sunlight conditions. The SKIMO SPLIT Plus has been tested at 2 temperature levels in a 2.5 m3 cabin:
The SKIMO SPLIT system was not started until the temperature inside the chamber had stabilised. During the test, the cabin was exposed to average solar energy equivalent to 800 W/m2, measured by pyranometer. The air conditioning system was connected to a 12-volt DC supply.
The readings were recorded by a datalogger equipped with calibrated ambient probes with a PT100 thermocouple, providing accuracy of +/- 0.1 °C.
5 minutes after starting: the temperature of the air from the air diffusers was 14.1 °C for a cabin temperature of 32 °C.
1 hour after starting: the temperature of the air diffusers was 6.3 °C for a cabin temperature of 25.4 °C. The difference in temperature between the test chamber and the cabin interior was 12.7 °C.
5 minutes after starting: the temperature of the air diffusers was 17.5 °C for a cabin temperature of 35.4 °C.
1 hour after starting: the temperature of the air diffusers was 9.9 °C for a cabin temperature of 29.8 °C. The temperature difference between the test chamber and the cabin interior was 13.6 °C.
Before being placed on the market, the SKIMO SPLIT Plus was subject to numerous longevity tests in different simulated usage conditions.
The wear of the SKIMO SPLIT Plus was analysed and monitored during tests in a climatic chamber simulating sudden changes of temperature.
During the production process, 100% of our SKIMO SPLIT Plus units are tested on an automated test rig.
All SKIMO SPLIT Plus systems are subject to rigorous testing on an automated test rig.
The SKIMO comes with a warranty for 2 years or 2,000 hours. This warranty does not cover consumables, normal wear and tear or damage caused by incorrect usage or operation in unsuitable conditions, including:
Since 1986, SNDC has been designing, developing and manufacturing
custom air conditioning and heating solutions tailored to your needs.